Yamaha DIGITAL MIXING STUDIO 01X - Manual (Page 90)

90
Function Tree/Function List
01X Owner’s Manual
Before Using
Basics Section
Appendix
Getting Started
Reference
5 OUTPUT PATCH (mLAN OUT CHANNEL)
w
ST-BUS → 1/2 – 23/24
(17/18 – 23/24 are
available in 48kHz/
44.1kHz mode only)
The 01X’s Stereo Out, Rec Bus Out, Aux Out 1 through 4 signals can be
patched to any mLAN output channels by using these Output Patch parameters
(also see page 30). Turning the knob immediately changes the routing. The
same output signal cannot be simultaneously routed to multiple mLAN output
channels. In the default settings, the direct out signal of the input channel is
assigned to the corresponding mLAN output channel.
• The direct out setting for a specific channel (see chart below) is cancelled
if the corresponding output channel is assigned to a bus here.
• The Output Patch settings made here can be stored to the Output Patch
Library (page 91).
No
8
30
62
@3
r
RECBUS →
1/2 – 23/24
(17/18 – 23/24 are
available in 48kHz/
44.1kHz mode only)
No
8
30
62
y
AUX1/2 → 1/2 – 23/24
(17/18 – 23/24 are
available in 48kHz/
44.1kHz mode only)
No
8
30
62
i
AUX3/4 → 1/2 – 23/24
(17/18 – 23/24 are
available in 48kHz/
44.1kHz mode only)
No
8
30
62
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
ST BUS
mLAN Channel (sequence)
1/2
OUTPUT PATCH
REC BUS
mLAN Channel (sequence)
3/4
AUX 1/2
mLAN Channel (sequence)
5/6
AUX 3/4
mLAN Channel (sequence)
7/8
mLAN Channel (sequence)
23/24
Direct out settings (when Stereo Out, Rec Bus Out
and Aux Out are not assigned to an mLAN pair)
Hardware Input mLAN Output Channel
AD1 mL1
: :
AD8 mL8
mL1 mL9
: :
mL8 mL16
mL9 mL17
: :
mL16 mL24
Wordclock =
48kHz/44.1kHz only