Yamaha DIGITAL MIXING STUDIO 01X - Manual (Page 99)

01X Owner’s Manual
Function Tree/Function List
99
Before Using
Basics Section
Appendix
Getting Started
Reference
■ EQ LIBRARY (Common to 4 bands) (Selected Channel only)
(This can be called up by pressing the same EQ button twice in a row. For example: [EQ LOW] → [EQ LOW])
q – r
01 – 200
(Library number) Determines the Library number. Preset EQ numbers (01 – 40; see page 115)
are indicated by asterisks (*) in the display and cannot be changed.
No 36
z – v (Title Edit) Determines the title (name) of the EQ Library. No 41
b RECALL
For calling up the selected EQ Library. The confirmation prompt can be
turned on/off as desired. (See “Recall Confirmation” on page 95.)
Yes 54
n STORE
EQ settings are stored to internal memory in the EQ Library. Up to 160 set-
tings can be stored. The confirmation prompt can be turned on/off as desired.
(See “Store Confirmation” on page 95.)
• Any and all data in the Store destination will be lost when executing the
Store operation. Make sure to save and archive important data to com-
puter using the Studio Manager program (page 9).
Yes 65
m CLEAR This deletes the selected EQ Library. Yes
PAN [INTERNAL] → ([SELECTED CHANNEL]) → [PAN]
PAN/BALANCE
q – i
( q )
L63 – CENTER – R63
Enables adjustment of the pan setting of the signals routed from the Input
Channels to the Stereo Bus. Pressing the [SEL] button of ST IN channels
repeatedly toggles between the left and right channels, for independent opera-
tion. You can also apply the pan setting to a pair of Bus channels. When the
Stereo Out (ST) is selected, it is used to set the balance.
No !1
RECBUS (REC bus assign)
q – i
( e )
ON/--
When this is set to on, the corresponding input channel signal is sent to the
Rec Bus.
No @1
ST-BUS (Stereo bus assign)
q – i
( r )
ON/--
When this is set to on, the corresponding input channel signal is sent to the
Stereo Bus.
No
@1
PHASE
q – i
( t )
NORMAL/REVERS
Switch the corresponding Input Channel phase. NORMAL indicates normal
phase, and REVERS indicates reversed phase. You can set the phase sepa-
rately for ST IN channel L/R or each channel in a channel pair. Pressing the
[SEL] buttons repeatedly toggles between L and R.
No 21
y
ON/OFF (Selected Channel only)
( u ) ON/OFF
Determines whether the channel is on or off. The channel is muted with the
Off setting. This works in unison with the [ON] button on the panel.
No o
LEVEL (Selected Channel only)
( i )
- ∞ – +6.0
(BUS/AUX/ST:
-
∞ – +0.0)
Enables adjustment of the input level of the Input Channel signal and the out-
put level of the Output Channel. When the channel knob 8 is pressed, the level
is set to nominal (0dB). This works in unison with the channel fader on the
panel.
No
!0
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]
[PAGE SHIFT] + DISPLAY [ / ]