Zebra Technologies 2 - Manual (Page 27)

O-21 UMAN-EN2+
Continued on next page
Cable Communications
All Encore 2 printers can communicate by cable; the
specific cable supplied with your printer will vary with the
host terminal. The 8- pin circular connector on your
communications cable plugs into the serial communica-
tions port on the bottom of the Encore 2
. It is keyed to
assure correct alignment; do not try to force it if it does
not plug in. The other end of the cable must be plugged
into the host terminal. Refer to pages A-1 through A-3 for
more information on the various communications cables
offered for the Encore 2
.
Communication between the terminal and the printer is
controlled by the applications running on the terminal and
the printer.