Xerox DocuMate 632 - Manual (Page 107)

Scanning with the ISIS Interface
102 DocuMate 632 Scanner User’s Guide
Scanning with the ISIS
Interface
You can use the ISIS interface from QuickScan or any other
application that will access the ISIS driver. Note that the ISIS
interface for each application varies depending on the application,
please refer to that software application’s User Guide for
instructions on scanning the ISIS interface. The QuickScan User’s
Guide is available on the Disc 1 CD that you received with the
scanner.
Accessing the ISIS interface in QuickScan
Open the QuickScan software to access the ISIS driver scanning
options. Please note that you may see the following warning
message:
1. Please disregard this message and click Continue.
The ISIS drivers were installed correctly during the installation
of your scanner.
The Scanner Selection dialog box will then appear.
2. Select Xerox DocuMate 632 from the list of scanners and click
OK.
Your scanner is then ready to work with the ISIS driver.