Xerox DocuMate 632 - Manual (Page 68)

DocuMate 632 Scanner User’s Guide 63
Scanning
Configure Before Scan
Choosing Configure Before Scan simply opens a scanning
interface when you press or click a scan button. You can then use
the interface to change the Resolution, Scan Mode, and other
settings. When you scan, the scanned image will still be sent as
the file type and to the same Destination Application already
selected in the One Touch Properties window for that button.
To Set Configure Before Scan:
1. Open the One Touch Properties window.
2. Using the arrows, choose the button that you want to set to
configure before scanning.
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface
to use for configuring before scanning.
Some interface options may not be available, based on the
drivers you installed for your scanner.
TWAIN—The TWAIN Interface opens for you to configure the
scanning. See “Scanning with the TWAIN Interface” on
page 82.
WIA—The Windows Image Acquisition Interface (WIA) opens
for you to configure the scanning (available on Windows XP or
Windows Vista only). See “Scanning with the WIA Interface” on
page 98.
5. Click OK or Apply on the One Touch Properties window.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the menu,
and choose the
interface to use for
configuring.