Setting the volume, Using headphones, Using the speaker switch – Yamaha CLP-230 User Manual

Page 12: English 12, Using the headphone hanger

Advertising
background image

Before Using the Clavinova

CLP-240/230

Owner’s Manual

ENGLISH

12

Setting the Volume

Initially set the

[MASTER VOLUME]

slider about halfway between the “MIN” and “MAX” settings. Then, when you start

playing, re-adjust the

[MASTER VOLUME]

slider to the most comfortable listening level.

CAUTION

Do not use the Clavinova at a high volume level for a long period of time, or your hearing may be damaged.

Using Headphones

Connect a pair of headphones to one of the

[PHONES]

jacks.
Two

[PHONES]

jacks are provided.

You can connect two sets of standard stereo head-
phones. (If you are using only one pair of headphones,
you can plug them into either jack.)

Using the Headphone Hanger

A headphone hanger is included in the CLP-240/230
package so that you can hang the headphones on the
Clavinova. Install the headphone hanger using included
two screws (4

×

10mm) as shown in the figure.

CAUTION

Do not hang anything other than the headphones on
the hanger. Otherwise, the Clavinova or the hanger
may be damaged.

Using the Speaker Switch

This switch turns the internal speakers on or off.
NORMAL (HP. SW) ......... The speakers produce sound as long as a pair of

headphones is not connected.

ON ....................................... The speakers always produce sound.
OFF ...................................... The speakers produce no sound.

TERMINOLOGY

MASTER VOLUME:

The volume level of the entire keyboard sound

NOTE

You can also adjust the

[PHONES]

output level and the AUX IN input level using the

[MASTER VOLUME]

slider.

MASTER VOLUME

MIN

MAX

The level decreases.

The level increases.

PHONES

SPEAKER

NORMAL

OFF

ON

HP. SW

standard
stereo
phone plug

bottom surface

PHONES

SPEAKER

NORMAL

OFF

ON

HP. SW

Advertising