Yamaha CLP-230 - Manual (Page 45)

Detailed Settings – [FUNCTION]
CLP-240/230 Owner’s Manual
ENGLISH
45
Basic Procedure in Function Mode
Follow the steps below to use the functions.
(If you become lost while using a function, return to this page and read the basic procedure.)
1.
Engage the Function mode.
Press the [TEMPO/FUNCTION#] button so that its [FUNCTION#] indicator
lights.
will appear on the display. (The indication of “ ” varies depending on
the status of the unit and usage.)
2.
Select a function.
Use the [TEMPO/FUNCTION# ▼, ▲] buttons to select the desired function
from F1–F9 (CLP-240) / F1–F8 (CLP-230).
3.
Use the [–/NO] [+/YES] buttons.
If the function does not include sub-modes, start setting the parameters.
If the function includes sub-modes, press the
[+/YES] button once to enter the
respective sub-mode.
4.
Operate the desired function using the following
two buttons.
1 [TEMPO/FUNCTION# ▼, ▲]
Selects the desired function/sub-mode.
2 [–/NO] or [+/YES]
After you select the desired function or sub-mode, set the ON/OFF, select
the type, or change the value, accordingly.
Depending on the setting, the default setting (which is used when you first
turn on the power to the Clavinova) is recalled by pressing the
[–/NO] and
[+/YES] buttons simultaneously.
MAX MIN
MASTER VOLUME DEMO
ON
TRANSPOSE
LEFT RIGHT
SONG SELECT FILE
PLAY/PAUSE STOP REC
SONG SYNC START
METRONOME
+ / YES – / NO
ON/OFF
TEMPO / FUNCTION #
TEMPO / OTHER VALUE
USB
USER
PRESET SAVE/EXP.
LOAD
FORMAT/DEL.
BRILLIANCE
BRIGHT
NORMAL
MELLOW
REVERB
HALL 1
ROOM
HALL 2
STAGE
EFFECT
PHASER
CHORUS
TREMOLO
ROTARY SP
TOUCH DDE
HARD
MEDIUM
SOFT
TEMPO
FUNCTION
#
VARIATION
SPLIT ON GUITAR
VIBRA-
PHONE E.CLAVI-
CHORD HARPSI- CHORD
WOOD
BASS E.BASS
E.PIANO
2 E.PIANO 1 GRAND
PIANO 1
CHURCH
ORGAN JAZZ
ORGAN
GRAND
PIANO 2
STRINGS CHOIR
VOICE
CLP -240
3 1 2 4 4 5
Procedure
NOTE
Functions cannot be selected
during Demo/Song Select/ file
operation (CLP-240) mode or
when the user song recorder is in
operation.
NOTE
To cancel the function in Step 2,
3, or 4, press the
[TEMPO/FUNC-
TION# ▼ , ▲ ] button any time to
exit Function mode.
TEMPO / FUNCTION #
TEMPO
FUNCTION
#
NOTE
After you select the function, the
current setting will be displayed
when the
[–/NO] or [+/YES] but-
ton is pressed for the first time.