Re-recording a previously recorded song, Procedure – Yamaha CLP-230 User Manual
Page 31
Recording Your Performance
CLP-240/230
Owner’s Manual
ENGLISH
31
Re-recording a previously recorded song
This section explains how to record again in case your performance was not satisfactory.
1.
Select a voice or voices (and other settings) for
recording, if necessary.
Repeat Step 1 on page 29 if you wish to change the previous settings.
2.
Re-engage Record Ready mode.
Press the
[REC]
button, again.
The selected part’s indicator lights in red.
Follow the procedure from Step 3 in “Recording a performance quickly” on
page 30 to re-record.
Procedure
NOTE
If you want to change the tempo,
time signature, reverb type, or
effect type when re-recording a
part or when recording to another
part, do so after you engage
Record Ready mode.
NOTE
You cannot re-record in the mid-
dle of a song.