Zanussi ZGF 692 CT - Manual (Page 16)

16
A) End of shaft with nut
B) Washer
C) Elbow
Installation Installation Installation Installation Installation
IMPOR IMPOR IMPOR IMPOR IMPOR T T T T TANT ANT ANT ANT ANT
This hob must be installed by a competent person to the This hob must be installed by a competent person to the This hob must be installed by a competent person to the This hob must be installed by a competent person to the This hob must be installed by a competent person to the
relevant Gas Standards.
relevant Gas Standards. relevant Gas Standards. relevant Gas Standards. relevant Gas Standards.
Any gas installation must be carried out by a registered Any gas installation must be carried out by a registered Any gas installation must be carried out by a registered Any gas installation must be carried out by a registered Any gas installation must be carried out by a registered
competent person.
competent person. competent person. competent person. competent person.
Please, ensure that, once the hob is installed, it is easily accessible for the
engineer in the event of a breakdown.
The manufacturer will not accept liability, should the above instructions or
any of the other safety instructions incorporated in this instruction booklet
be ignored.
On the end of the shaft, which includes the G 1/2" threaded elbow,
adjustment is fixed so that the washer is fitted between the components
as shown in the diagram. Screw the parts together without using excessive
force.