Zephyr EOT-E42ASX - Manual (Page 15)

15
www.zephyronline.com
17. Assemble the lower (narrow) trim strips to the lower
vent cover assembly.
Cut the upper (wide) trim strips to length to fit the
upper duct cover assembly.
Assemble the upper trim strips to the upper duct
cover assembly.
Upper
tab
Lower
tab
Lower
tab
X
X
Upper
tab
18. Check all light bulbs to make sure they are secure in
their sockets.
Turn power on in service panel.
Check lights and blower operation per Care & Use
section of this manual.
If range hood does not operate:
• Check that the circuit breaker is not tripped or the
house fuse blown.
• Disconnect power supply. Check that wiring is
correct.
To get the most efficient use from your new range
hood, read the “Use and Care Information” section.
Keep your Installation Instructions and Use and
Care Guide close to range hood for easy reference.
Inst
allation