ZyXEL Communications P-334U - Manual (Page 179)

P-334U/P-335U User’s Guide
Chapter 15 Bandwidth Management 179
15.8 Bandwidth Management General Configuration
Click Management > Bandwidth MGMT to open the bandwidth management General
screen.
Figure 104 Bandwidth Management: General
The following table describes the labels in this screen.
Table 66 Bandwidth Management: General
LABEL DESCRIPTION
Enable Bandwidth
Management
Select this check box to have the ZyXEL Device apply bandwidth management.
Enable bandwidth management to give traffic that matches a bandwidth rule
priority over traffic that does not match a bandwidth rule.
Enabling bandwidth management also allows you to control the maximum or
minimum amounts of bandwidth that can be used by traffic that matches a
bandwidth rule.
Enable Automatic
Traffic Classifier
This field is only applicable when you select the Enable Bandwidth
Management check box.
Select this check box to have the ZyXEL Device base on the default bandwidth
classes to apply bandwidth management. Real-time packets, such as VoIP traffic
always get higher priority.
Apply Click Apply to save your customized settings.
Reset Click Reset to begin configuring this screen afresh.