ZyXEL Communications P-334U - Manual (Page 78)

P-334U/P-335U User’s Guide
78 Chapter 4 Wireless LAN
4.4.1 Enabling OTIST
You must enable OTIST on both the AP and wireless client before you start transferring
settings.
Note: The AP and wireless client(s) MUST use the same Setup key.
4.4.1.1 AP
You can enable OTIST using the OTIST button or the web configurator.
4.4.1.1.1 OTIST button
If you use the OTIST button, the default (01234567) or previous saved (through the web
configurator) Setup key is used to encrypt the settings that you want to transfer.
Hold in the OTIST button for about two seconds.
4.4.1.1.2 Web Configurator
Click the Network > Wireless LAN > OTIST. The following screen displays.
Figure 39 OTIST