ZyXEL Communications P-334U - Manual (Page 95)

P-334U/P-335U User’s Guide
Chapter 6 WAN 95
C
H A P T E R
6
WAN
This chapter describes how to configure WAN settings.
6.1 WAN Overview
See the chapter about the connection wizard for more information on the fields in the WAN
screens.
6.2 WAN MAC Address
The MAC address screen allows users to configure the WAN port's MAC address by either
using the factory default or cloning the MAC address from a computer on your LAN. Choose
Factory Default to select the factory assigned default MAC Address.
Otherwise, click Spoof this computer's MAC address - IP Address and enter the IP address
of the computer on the LAN whose MAC you are cloning. Once it is successfully configured,
the address will be copied to the rom file (ZyNOS configuration file). It will not change unless
you change the setting or upload a different ROM file.
It is recommended that you clone the
MAC address prior to hooking up the WAN Port.
6.3 Internet Connection
To change your ZyXEL Device’s Internet access settings, click Network > WAN. The screen
differs by the encapsulation.
6.3.1 Ethernet Encapsulation
The screen shown next is for Ethernet encapsulation.