Zebra Technologies T402 - Manual (Page 10)

WARNING: NEVER OPERATE THE PRINTER AND POWER
SUPPLY IN AN AREA WHERE THEY CAN GET WET.
PERSONAL INJURY COULD RESULT!
DC Power Supply
Refer to Figure 1.
1. The DC power supply has a barrel connector on one end that must be
inserted into the power supply receptacle on the back of the printer.
2. Insert the separate AC power cord into the power supply.
3. Plug the other end of the cord into an appropriate AC electrical outlet.
3
Plug
Varies by
Country
AC
Power
Cord
Power
Supply
Power
Switch
Power
Supply
Receptacle
Barrel
Connector
Figure 1