Zebra Technologies T402 - Manual (Page 33)

Operator Controls
Refer to Figure 30.
Power Switch
n Press to turn on and turn off the printer.
CAUTION: The power should be turned off be fore con nect ing
or dis con nect ing the com mu ni ca tions and power ca bles.
Feed Button
n Forces the printer to feed one blank label.
n When printing, puts the printer into a “pause” condition.
n Takes the printer out of a “pause” condition. (The printer is put into
“pause” by either a ZPL II command or an error condition.) See
“What
the Status LED is Telling You” on page 31.
n Used for printer setup and status (see “Feed Button Modes” on page 37).
Status LED
n Functions as a printer operational indicator (see “What the Status LED is
Telling You” on page 31).
26
Feed
Button
Status
LED
Power
Switch
Figure 30