Zebra Technologies R170XiTM - Manual (Page 135)

Routine Maintenance
Replace Fuse
23063L-003 Rev. 2 12/23/04 R110Xi/R170Xi User Guide 123
Figure 49 • Fuse Locations
3. Snap the fuse holder back into the AC power entry module.
4. Reconnect the power cord, and turn the printer On (I).
1 In-circuit fuse
2 Fuse holder
3 Spare fuse
Note • If the printer does not power on, an internal component failure may have occurred,
and the printer requires servicing by an authorized service technician.
1
2
3