Zoom 4420-A User Manual
Page 11
Advertising
Chapter 1. Installing the AP+4
11
7777
On the Configuring the Wireless Network page, enter your
wireless network parameters.
•
At
Band, select the type(s) of devices in your network:
!
B+G if the network includes both 802.11b and
802.11g devices (default). This option is best for
most users.
!
B if the network includes only 802.11b devices
!
G if the network includes only 802.11g devices
•
At
Wireless Operation, select
!
AP if you are using the AP+4 as a Router/Access
Point or a Repeater
!
Client if you are using the AP+4 as an Ethernet
Client
!
WDS if you want to use the AP+4 as a Repeater in
WDS (Wireless Distribution System) mode.
Advertising
This manual is related to the following products: