Zoom 4420-A - Manual (Page 59)

Chapter 7. VPN Settings 59
Local Subnet
Mask (If Subnet Address is selected) Enter
255.255.255.0
Remote Site Select Subnet Address, Single Address,
Any Address
, or NAT-T Address
Remote Secure
Gateway Enter the WAN IP address of the remote VPN
connection.
Remote IP
Address/Network Enter the LAN IP address or the LAN network
IP address of the remote VPN connection.
Remote Subnet
Mask Enter the Subnet Mask of the remote VPN
connection.
Local/Peer ID These four options let you limit use of the VPN
to a single user at each end of the tunnel.
Local ID Type Select the type of identification entered by the
user at the local site: IP, DNS (URL), or Email.
Local ID Enter the local user’s IP address, URL, or
email address.
Remote ID Type Select the type of identification entered by the
user at the remote site: IP, DNS (URL), or
Email.
Remote ID Enter the remote user’s IP address, URL, or
email address.
Key Management Select:
IKE
to use Internet Key Exchange Protocol.
Click the Advanced button to configure IKE
(see page 62).
Manual
to enter encryption and authentication
keys.