Operating mode – Zoom 4420-A User Manual
Page 19
Advertising
Chapter 3. Operating Mode
19
3
Operating Mode
Selecting an Operating Mode is the first step in configuring your
AP+4.
You may have completed this step using the Setup Wizard
described in Chapter 1. If you want to change these settings, or if
you are manually configuring the AP+4, in the left menu pane
select Operation Mode.
Note: To use the AP+4 as a Repeater, choose Router/AP, and
then on the Wireless Basic Settings page, select Enable
Universal Repeater Mode (see page 12).
Advertising
This manual is related to the following products: