Zoom 4420-A User Manual
Page 46
Advertising
46
Zoom AP+4 User Guide
Parameter
Select or enter . . .
Port Range
Enter a range of ports to be disabled. Note:
You can enter more than one range, but you
must click Apply Changes after each entry.
Protocol
Select
•
TCP (Transmission Control Protocol)
•
UDP (User Datagram Protocol)
•
Both
Click Apply Changes to add the Port Range
and protocol to the Current Port Filter list.
Delete Selected
In the Current Filter Table, click the Select
check box for one or more Port Ranges and
then click this button to delete.
Delete All
Click this button to clear the Filter Table.
Reset
Click to clear the Select check boxes.
Advertising
This manual is related to the following products: