Zebra Technologies P420i - Manual (Page 16)

General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
P420i Plastic Card Printer
Appendix C
2•3 Loading Cards
To help you load, print, and collect cards, the P420i has the following items:
A - CARD FEEDER
This items is used for loading cards.
DO NOT bend cards or touch print surfaces as this can
reduce print quality. The surface of the cards must
remain clean and dust free. Always store cards in an
enclosed container. Ideally, use cards as soon as
possible. If cards stick together, carefully shuffle them.
1.· Open Card Feeder Cover by putting your
fingers on both sides and rotating the cover in a
clockwise direction to the open position.
2.· Install cards into Feeder* as shown.
3.· Close Card Feeder Cover.
* See Chapter 6, Technical Specifications, for card requirements and capacities.
Card
Printer
Solutions