Zebra Technologies P420i - Manual (Page 31)

General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
P420i Plastic Card Printer
Appendix C
4•1 Cleaning System
Your P420i Printer includes a simple cleaning system using the Pre-Saturated
Cleaning Cards provided. The regular use of these cards will clean and maintain
important parts of your printer: including the Print Head, and Transport Rollers.
WHEN TO CLEAN
When LCD screen reports message.
HOW TO CLEAN
1. Leave power on.
Open Cover and release Print Head Bracket to remove
ribbon.
Close Print Head bracket.
Close Cover. Remove cards from Card Feeder.
2. Insert one Pre-Saturated Cleaning Card (provided)
through slot on the side of the Card Cartridge.
3. Press the right Panel Button for a few seconds. The
card will feed into printer and carry out the cleaning
process. Repeat the process with a new Cleaning Card
if necessary.
Although the CLEAN PRINTER message is
displayed until the cleaning process has been
performed, the printer will continue to operate.
Note: For a printer cleaning prior to the WHEN TO CLEAN signal, press the Left
Panel Button until the LCD screen shows "CLEANING MENU". Press the right Panel
Button to select and one more time again to run the cleaning process (Repeat first
steps 1 & 2 above).
CLEAN
PRINTER
Card
Printer
Solutions