Zebra Technologies P420i - Manual (Page 2)

General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
P420i Plastic Card Printer
Appendix C
FOREWORD
This manual contains installation and operation information for the Zebra P420i by
Zebra Technologies Corporation.
RETURN MATERIALS AUTHORIZATION
Before returning any equipment to Zebra Technologies Corporation for
in-warranty or out-of-warranty repair, contact Repair Administration for a Return
Materials Authorization (RMA) number. Repack the equipment in the original packing
material and mark the RMA number clearly on the outside. Ship the equipment,
freight prepaid, to the address listed below:
For USA, and Latin America
Zebra Technologies Corporation
Card Imaging Division
1001 Flynn Road
Camarillo, CA. 93012-8706. USA
Phone: +1 (805) 579 1800
Fax: +1 (805) 579 1808
Toll Free in US: (800) 452-4056
For Europe, Asia and Pacific:
Zebra Technologies France
Card Imaging Division
Zone Industrielle, Rue d’Amsterdam
44370 Varades, France
phone: +33 (0) 240 097 070
Fax: +33 (0) 240 834 745
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation.
This document and the information contained within is copyrighted by Zebra
Technologies Corporation and may not be duplicated in full or in part by any person
without written approval from Zebra. While every effort has been been made to keep
the information contained within current and accurate as of the date of publication,
no guarante is given or implied that the document is error-free or that it is accurate
with regard to any specification. Zebra reserves the right to make changes, for the
purpose of product improvement, at any time.
TRADEMARKS
P420i is a service mark and Zebra is a registered trademark of Zebra Technologies
Corporation. Windows and MS-DOS are registered trademarks of Microsoft Corp. All
other marks are trademarks or registered trademarks of their respective holders.
Card
Printer
Solutions