Zebra Technologies P420i - Manual (Page 34)

General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
P420i Plastic Card Printer
Appendix C
3. ·Remove Cleaning Roller from Cartridge and
discard.
4. ·Install new Cleaning Roller into Cartridge*. To
avoid contamination, always hold the Cleaning
Roller assembly by the ends.
5. ·Carefully peel off wrapper from new Cleaning
Roller while in Cartridge.
6.· Replace Cartridge into printer. Make sure the
arrow on top of the assembly is facing toward the
rear of the printer. Hook assembly into slot on
printer and rotate down. Ensure the assembly locks
in place.
DO NOT touch the roller surface that contacts the
cards.
7. ·Close Cover.
* See Appendix C for replacement Cleaning Rollers.
SLOT
Although the CLEAN PRINTER message is
displayed until maintenance has been
performed, the printer will continue to operate.
Card
Printer
Solutions