Playing back sound clearly (my beam), Using auto-adjust function, Turning on cinema dsp programs – Yamaha Digital Sound YSP-900 User Manual

Page 51: Turning off cinema dsp programs, Adjusting cinema dsp effect levels, D 47)

Advertising
background image

PLAYING BACK SOUND CLEARLY (MY BEAM)

47

En

BA

S

IC

OPERA

T

ION

English

You can improve listenability in a noisy environment by changing the beam mode to the my beam, outputs sound beams
directly to the listening position in a single channel. In addition, the my beam is also ideal if you do not want the sound
beams to be reflected on the walls in your listening room or if you do not disturb others asleep while enjoying music or
movies at night.

If the my beam is selected as the beam mode, the surround modes (see page 42), the CINEMA DSP programs (see page 49) and the
TruBass (see page 54) become ineffective. In addition, no audio is output from the subwoofer connected to this unit.

The my beam microphone on the remote control collects
the test tones from this unit, and then the beam angle is
automatically adjusted.

1

Set the operation mode selector to YSP to
switch to the operation mode of this unit.

2

Press and hold MY BEAM on the remote
control more than 2 seconds.
A test tone is output twice from this unit. Keep
pointing the remote control toward this unit during
the test tones are being output so that the my beam
microphone can collect the test tones.
Control range: L50° to R50°
Operation guarantee range: 6 m (20 ft), L30° to R30°

• If an error occurs, an error buzzer is played and MY BEAM

ERROR is displayed on the front panel display.

• An error may occur if the listening room is noisy. Make sure

that the listening room is as quiet as possible during the test
tones are being output.

• Do not shake or move the remote control during the test tones

are being output.

• Do not cover the my beam microphone on the remote control

during the test tones are being output.

• The batteries in the remote control may be week if the remote

control does not function properly. In such case, replace all the
batteries and then try the procedure again.

PLAYING BACK SOUND CLEARLY (My beam)

Note

POWER

POWER

STANDBY/ON

TV

AV

STEREO

MY BEAM

2

1

CH LEVEL

MENU

RETURN

TEST

ENTER

SURROUND

OFF

SPORTS

3

4

5

6

7

8

9

0

+10

5BEAM

ST+3BEAM

3BEAM

MUSIC

MOVIE

YSP

TV/AV

My beam
microphone

Using auto-adjust function

YSP

TV/AV

5

MY BEAM

Notes

01EN_YSP-900_UAB_EN.book Page 47 Thursday, February 22, 2007 2:07 PM

Advertising