Yamaha RX-797 - Manual (Page 15)

CONTROLS AND FUNCTIONS
11
INTR
ODUCTION
■ Notes on batteries
• Change all of the batteries if the operation range of the remote controls decreases.
• Use AA, R6, UM-3 batteries for the remote control and AAA, R03, UM-4 batteries for the Zone 2 remote control.
• Make sure that the polarities are correct. See the illustration inside the battery compartment of each remote control.
• Remove the batteries if the remote controls are not used for an extended period of time.
• Do not use old batteries together with new ones.
• Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these
different types of batteries may have the same shape and color.
• We strongly recommend using alkaline batteries.
• If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with
clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
• Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.
Remote control Zone 2 remote control
1
Open the battery compartment cover.
2
Insert the supplied batteries in each remote
control according to the polarity markings (+
and –) on the inside of the battery
compartment.
3
Close the cover back.
The remote controls transmit a directional infrared beam.
Be sure to aim the remote controls directly at the remote control sensor on the front panel of this unit or on the infrared
signal receiver in Zone 2 during operation.
■ Handling the remote controls
• The area between the remote controls and this unit (or the
infrared signal receiver in Zone 2) must be clear of large
obstacles.
• Do not spill water or other liquids on the remote controls.
• Do not drop the remote controls.
• Do not leave or store the remote controls in the following types
of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a heater or a stove
– places of extremely low temperatures
– dusty places
• Do not expose the remote control sensor to strong lighting, in
particular, an inverter type fluorescent lamp; otherwise, the
remote controls may not work properly. If necessary, position
this unit away from direct lighting.
Installing batteries in the remote controls
1
3
2
1
3
2
Using the remote controls
VOLUME
ON/OFF
INPUT MAIN ZONE PHONES BASS
MASTER SPEAKERS
ON OFF
CD DIRECT AMP PURE DIRECT
5 5
1 0 1
4 4
2 2
3 3
+ –
l TUNING/CH h ZONE 2 ON/OFF
ZONE CONTROL
FM/AM
EDIT
SEARCH MODE
A/B/C/D/E 1 2 3 4 5 6 7 8
CATEGORY
MEMORY
MAN'L/AUTO FM
TUN MODE/DISP
AUTO/MAN'L
B A
TREBLE
5 5
1 0 1
4 4
2 2
3 3
+ –
BALANCE
5 5
1 0 1
4 4
2 2
3 3
R L
LOUDNESS
5 7
1 FLAT
6
4 8
2 10 –30dB
3 9
REC OUT MD/TAPE CD XM
DVD
VCR TUNER
DTV/CBL PHONO
XM/ANT
30 30
STANDBY POWER
CD MD/TAPE TUNER
PHONO DVD
SLEEP
TV
A
B
POWER POWER
REC AUDIO
MUTE
MENU TITLE
VOLUME
DISC SKIP
SRCH MODE BAND
PRESET/CH
4 3 2 1
8
10
7
0 9
6 5
ENT.
DISPLAY RETURN A-E/CAT. A-E/CAT.
MEMORY
MUTE INPUT
VOL CH
AV TV
ENTER
VCR DTV/CBL
SPEAKERS
XM
Approximately 6 m (19.7 ft)