Yamaha RX-797 - Manual (Page 8)

CONTROLS AND FUNCTIONS
4
8 EDIT, SEARCH MODE
Exchanges the assignment of two preset stations with each
other when TUNER is selected as the input source (see
page 29).
Switches between search modes when XM is selected as
the input source (see page 33).
9 FM/AM, XM ANT (ANTENNA)
Switches the reception band between AM and FM when
TUNER is selected as the input source (see page 24).
Shows the reception level of the XM Connect-and-Play
digital antenna (sold separately) when XM is selected as
the input source (see page 31).
0 TUNING/CH l / h
Selects the tuning frequency when TUNER is selected as
the input source (see page 24).
Searches for a radio channel or selects the preset channel
number when XM is selected as the input source (see page
31).
A TUN (TUNING) MODE/DISP (DISPLAY)
Switches the tuning mode between automatic (the AUTO
indicator turns on as a result) and manual (the AUTO
indicator turns off as a result) when TUNER is selected as
the input source.
Switches the XM Satellite Radio information shown in the
front panel display between channel number/name,
category and artist name/song title when XM is selected as
the input source (see page 34).
B MEMORY
Stores a station in the system memory (see page 28).
Sets this unit to the automatic preset tuning mode (see
page 26).
Stores a radio channel in the system memory when XM is
selected as the input source (see page 37).
C PURE DIRECT and indicator
Allows you to listen to a source in the purest possible
sound. The indicator above it lights up when this function
is turned on.
See page 20 for details.
D CD DIRECT AMP and indicator
Allows you to listen to a CD source in the purest possible
sound. The indicator above it lights up and the front panel
display turns off when this function is turned on.
See page 20 for details.
E VOLUME
Increases or decreases the sound output level.
This does not affect the OUT (REC) level.
F INPUT selector
Selects the input source you want to listen to or watch.
G A/B/C/D/E, CATEGORY
Selects the preset station group (A to E) when TUNER is
selected as the input source (see page 27).
Switches between channel categories or selects the preset
channel group when XM is selected as the input source
(see page 35).
H PHONES jack
Outputs audio for private listening with your headphones.
Press SPEAKER A/B so that the SP A/B indicators turn off
before you connect your headphones to the PHONES jack.
I REC OUT selector
Selects a source for recording to the MD recorder or the
tape deck independently of the INPUT selector setting,
allowing you to record the selected source while listening
to another source (see page 21).
J BASS
Increases or decreases the low frequency response. The 0
position produces a flat response (see page 20).
K TREBLE
Increases or decreases the high frequency response. The 0
position produces a flat response (see page 20).
L BALANCE
Adjusts the sound output balance of the left and right
speakers to compensate for sound imbalances caused by
speaker locations or listening room conditions (see page
20).
M LOUDNESS
Retains a full tonal range at any volume level to
compensate for the human ears’ loss of sensitivity to high
and low-frequency ranges at a low volume level (see page
20).
N Preset station/channel number buttons
(1 to 8)
Selects the preset station/channel number (1 to 8) directly
when TUNER or XM is selected as the input source (see
page 29).
The XM Satellite Radio features (XM ANT, CH, SEARCH
MODE, DISP, CATEGORY, MEMORY and the preset channel
number buttons) are only applicable to the U.S.A. model and are
operational only when XM is selected as the input source. For
details, see “XM SATELLITE RADIO TUNING” on page 30.
Note
Note
Note