Xm satellite radio ■ remote control – Yamaha RX-797 User Manual

Page 52

Advertising
background image

48

TROUBLESHOOTING

XM Satellite Radio

Remote control

Error message

Cause

Remedy

CHECK ANTENNA

The XM Connect-and-Play digital antenna
accessory is not connected, or does not work
properly.

Check the XM Connect-and-Play digital antenna accessory
connections.

UPDATING

The XM user encryption code is being updated.

Wait until the encryption code is updated.

NO SIGNAL

The signal is too weak.

Check the XM Connect-and-Play digital antenna accessory
connections and orient it for the best reception.

LOADING

It takes longer than four seconds for audio or
text data to be decoded.

Wait until the decoding process has finished.

OFF AIR

The XM Satellite Radio channel you selected is
not currently broadcasting any signal.

Check the channel number again or select another XM
Satellite Radio channel.

<XM> - - -

The channel station ID (SID) is no longer
available.

- - - / - - -

No artist name/feature or song/program title is
available.

<CAT> - - -

No channels are available for the selected
category.

Select another channel category by pressing CATEGORY on
the front panel (or A-E/CAT. j / i on the remote control)
repeatedly.

Problem

Cause

Remedy

See

page

The remote control
does not work nor
function properly.

Wrong distance or angle.

The remote control will function within a maximum
range of 6 m (19.7 ft) and no more than 30 degrees
off-axis from the front panel.

11

Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.

Reposition this unit.

The batteries are weak.

Replace all batteries.

11

The remote control ID and this unit’s ID
do not match.

Switch the remote control ID or this unit’s ID.

9,39,40

The remote control code was not correctly
set.

Try setting another code of the same manufacturer
using “LIST OF REMOTE CONTROL CODES” at
the end of this manual.

45

Even if the remote control code is
correctly set, there are some models that
do not respond to the remote control.

Use the supplied remote control for the components.

Advertising