Yamaha ACD1 - Manual (Page 12)

ACD1 Reference Manual 12
Panel operations
This indicates the output level of the amp connected to the ACD1.
■ Amplifier output (“3. Output Monitor”)
Displays the output level for each channel of the specified amplifier.
Here you can make settings to identify the ACD1 connected to the
network and the amplifiers connected to the ACD1.
■ Device ID setting (“4. Device Setup” ➝ “Device ID”)
Specifies the ACD1’s Device ID. Set the Device ID so that it does not con-
flict with another ACD1 etc. connected to the network.
• If you press and hold down this button for three seconds or longer while the HOME screen is displayed, the screen will
appear.
■ View ACD1 name (“4. Device Setup” ➝ “Device Label”)
Displays the name of the ACD1 assigned by Amp Editor.
• This shows up to 14 alphanumeric characters. The fifteenth and
following characters will not be shown.
• Characters not appearing in the character list at the end of this
manual are displayed as “ ~ .”
Amplifier output monitor (“3. Output Monitor”)
Parameter Range Explanation
Amp ID 00–39 Selects the ID of the amp whose output level you want to view.
Level 0 Nothing will appear in the meter if the level is below 0 dBu.
1 0–6 dBu
2 6–16 dBu
3 16–22 dBu
4 22–28 dBu
5 28–34 dBu
6 34–41 dBu
7 41 dBu–
Device setup (“4. Device Setup”)
Parameter Range Explanation
Device ID 000–255 Selects the ACD1’s Device ID.
å 3.Output Monitor
å Amp ID: 01
A~B~
å 4.Device Setup
Device ID
å
Device ID
001
NOTE
Device Label
[Rack L-ACD1 ]
NOTE