Gpi in calibration, Network settings ("6. network setup"), Ip address mode setting – Yamaha ACD1 User Manual
Page 16: Ip address setting, Checking the mac address, Utility, Gpi calibration”), Network settings (“6. network setup”), Network setup, Ip address mode”)
ACD1 Reference Manual
16
Panel operations
■ GPI IN calibration (“5. Utility” ➝ “GPI Calibration”)
Calibrates the detected range of the [GPI IN] connector input voltage.
Here you can make network settings for the ACD1.
■ IP Address Mode setting (“6. Network Setup” ➝ “IP Address Mode”)
This specifies whether the ACD1’s IP address will be set automatically by
Amp Editor’s Network Setup or a DHCP server, or manually.
• If you’re using a DHCP server, start up the DHCP server before the ACD1.
• For details on this mode, refer to the Amp Editor owner’s manual.
■ IP Address setting (“6. Network Setup” ➝ “IP Address”)
If the IP Address Mode is Manual, the ACD1’s IP address will be specified
manually.
If the IP Address Mode is DHCP, the assigned IP address will be displayed.
• If the IP Address mode is DHCP, the manually assigned IP address will be ignored.
■ Checking the MAC address (“6. Network Setup” ➝ “MAC Address”)
This displays the MAC address of the ACD1’s [NETWORK] connector.
Parameter
Range
Explanation
Port No.
1–4
Selects the port of the [GPI IN] connector that will be calibrated.
Minimum/maximum
value setting
Min/Max
Selects whether you will be setting the minimum (Min) or maximum (Max) value for
the input voltage.
Voltage value
--
Indicates the input voltage.
At the left of the “–>” symbol is shown the specified voltage (maximum/minimum
value), and at the right is shown the current input voltage. When you confirm the set-
ting, the current input voltage will be assigned as the maximum/minimum value.
Network settings (“6. Network Setup”)
Parameter
Range
Explanation
IP Address Mode
DHCP
The address will be set automatically. If you power-off in this mode, the IP address
setting will be cleared.
Manual
The address will be set manually. In this mode, the IP address setting will be saved
even if you power-off.
Parameter
Range
Explanation
IP Address
001.000.000.001–223.255.255.254
Specifies the ACD1’s IP address.
å
Port No.:
3
Min:3.4V->4.2V
å
6.Network Setup
IP Address Mode
å
IP Address Mode
DHCP
NOTE
å
IP Address
192.168.000.002
NOTE
MAC Address
00A0DE251500