Adjusting the level of the effect speakers – Yamaha RX-V1000RDS User Manual

Page 50

Advertising
background image

48

3

Press –/+ to adjust the speaker output level.

• The control range for the center, left and right rear

or rear center speakers is from +10 dB to –10 dB.

• The control range for the subwoofer is from 0 dB

to –20 dB.

y

• When PARAMETER/SET MENU is set to SET MENU, you

cannot adjust the output level by using LEVEL. However, each
time you press LEVEL, the current level of each speaker
appears on the front panel display and you can check the
speaker level.

Notes

• If the speaker output mode is set to NONE, the output level of

that speaker cannot be adjusted.

• When you adjust the output level with LEVEL, the settings you

made with the test tone will be changed.

Memory back-up

The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the output level of the effect speakers
you adjusted will return to the factory settings. If so,
adjust the output level again.

ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS

PARAMETER

SET MENU

LEVEL

You can adjust the output level of each effect speaker
(center, left and right rear, rear center (see page 17) and
subwoofer) while listening to a music source.

Adjustment should be made with the remote control.

1

Set PARAMETER/SET
MENU to PARAMETER.

2

Press LEVEL repeatedly to select the
speaker(s) you want to adjust.

Each time you press LEVEL, the selected speaker
changes and appears on the front panel display and
on the video monitor as follows: center, right rear,
rear center (see page 17), left rear and subwoofer.

ON SCREEN LEVEL

SLEEP

TEST

PARAMETER

SET MENU

3

2

1

LEVEL

Center speaker output level

Right rear speaker output
level

Rear center speaker output
level

Left rear speaker output
level

Subwoofer output level

y

• Once you press LEVEL, you can also select the speaker(s) to

be adjusted by pressing n. (Pressing k changes the selection in
the reverse order.)

0108V1000RDS_39-49_EN

9/5/0, 4:43 PM

48

Advertising