Yamaha RX-V1000RDS - Manual (Page 62)

REMOTE CONTROL FEATURES
60
(*4)
STANDBY
POWER
/
PLAY
PLAY
PLAY
PLAY
PLAY
PLAY
CBL/SAT
CD
DVD
D-TV/LD
CD-R
PHONO
MD/TAPE
VCR 2/DVR
VCR 1
V-AUX
TUNER
CBL/SAT
CD
DVD
D-TV/LD
CD-R
STANDBY
PHONO
MD/TAPE
VCR 2/DVR
VCR 1
V-AUX
TUNER
SYSTEM
POWER
SYSTEM
POWER
CD
PLAY CD SYSTEM
POWER
– –
– –
–
–
–
–
–
– –
–
Using the Macro Feature
The Macro feature makes it possible to perform a series of operations by pressing just one button. For example, when
you want to play a CD, normally you would turn on the components, select the CD input, and press the play button to
start playback. The Macro feature lets you perform all those operations by simply pressing the CD macro button. The
macro buttons (the input selector buttons, A and B buttons, SYSTEM POWER and STANDBY) are factory set with
macro programs. You can also program your own macros (see page 61).
Press one of the macro buttons Automatically transmits signals of each button sequentially
(CD area)
Macro buttons First Second Third
(*1)
(MD/TAPE area) (*3)
(CD-R area) (*3)
(CD area) (*3)
(VCR 1 area) (*3)
(VCR 2/DVR area) (*3)
(DVD area) (*3)
(D-TV/LD area) (*2)
*1 In order to turn on some components (including YAMAHA components) connected to this unit, connect those components to the
AC OUTLET(S) on the rear panel. (Power control may not be synchronized with this unit depending on the component. For details,
please refer to the operation instruction for the connected component.)
*2 If the macro you select includes power control functions, the component may be turned off if it is already on when you press the
macro button. For example, if your TV is on and you press the SYSTEM POWER macro button, the TV is turned off.
*3 Playback can be started with any YAMAHA remote control-compatible MD recorders, CD players, CD recorders, DVD players,
and LD players. When using macros to operate other components, it is either necessary to program the PLAY button on the control
area of that component (see page 58) or to set up a manufacturer code (see page 57).
*4 When TUNER is selected as the input source, this unit receives the last station when this unit was set in the standby mode.
0110V1000RDS_57-63_EN 9/5/0, 4:44 PM 60