ZyXEL Communications NSA210 - Manual (Page 143)

Chapter 6 System Setting
NSA210 User’s Guide
143
End Date Configure the day and time when Daylight Saving Time ends if
you selected Enable Daylight Saving. The o'clock field uses
the 24 hour format. Here are a couple of examples:
Daylight Saving Time ends in the United States on the first
Sunday of November. Each time zone in the United States stops
using Daylight Saving Time at 2 A.M. local time. So in the United
States you would select November, First, Sunday, at 2:00.
Daylight Saving Time ends in the European Union on the last
Sunday of October. All of the time zones in the European Union
stop using Daylight Saving Time at the same moment (1 A.M.
GMT or UTC). So in the European Union you would select
October, Last, Sunday. The time you specify depends on your
time zone. In Germany for instance, you would type 2 because
Germany's time zone is one hour ahead of GMT or UTC
(GMT+1).
Offset Specify by how many hours to change the time for Daylight
Saving Time.
Apply Click this to save your changes. If you configured a new time
and date, Time Zone and Daylight Saving at the same time, all
of the settings take affect.
Cancel Click this to restore your previously saved settings.
Table 18 System Setting > Date/Time (continued)
LABEL DESCRIPTION