ZyXEL Communications NSA210 - Manual (Page 37)

Chapter 2 NAS Starter Utility
NSA210 User’s Guide
37
Click Next in the Network Configuration screen to initialize the hard disk and
install the firmware.
Figure 10 NAS Starter Utility > Firmware Path
The following table describes the labels in this screen.
Table 4 NAS Starter Utility > Firmware Path
LABEL DESCRIPTION
Browse Click this and point to the location of the file provided by your
administrator or that came on the CD-ROM.
Initialize hard
disk This option is checked by default when the NAS Starter Utility detects
that the hard drive does not have the firmware installed.
Note: The NSA formats the hard disk and installs the firmware.
This deletes all existing data in the hard disk.
Clear this if your hard disk has the NSA firmware installed and you
want the NSA to retain the existing data in the hard disk. When you
check this OR fail to clear this, you will lose all data in the hard disk
even if the NSA recognizes the hard disk format and can retain all data.
Note: The checkbox can be checked or cleared only if the hard
disk format is compatible with the NSA. If the hard disk
format is not compatible with the NSA, this checkbox is
checked by default and cannot be modified.
Back Click this to go back to the previous screen.
Next Click this to go to the next screen to confirm your settings. The hard
disk initialization and firmware installation starts. Please wait one
minute for the process to finish. If the installation is successful, the
NSA reboots.
Cancel Click this to return to the previous screen without saving.