Sony SLV-SE100A2 - Manual (Page 10)

10 Connecting the VCR
If your TV has a Scart (EURO-AV) connector
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is
recommended. In the OFF position, only the signal from the aerial is output through the
AERIAL OUT connector (see page 15).
1 Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
2 Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
3 Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV) connector
on the TV with the optional Scart
cable.
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press t TV/
VIDEO to display the VIDEO
indicator in the display window.
4 Connect the mains lead to the mains.
Mains lead
i LINE-1
(TV)
AERIAL IN
Scart (EURO-AV)
to mains
Aerial cable (supplied)
AERIAL OUT
: Signal flow
Scart cable (not supplied)
AERIAL IN
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE