Sony SLV-SE100A2 User Manual
Page 68
68
Checking/changing/cancelling timer settings
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Tip
• In step 6 above, you can check the TIMER LIST by selecting LIST and pressing OK. Press
MENU to exit the TIMER LIST.
4
Press
M/m to select the setting you want to
change or cancel, then press OK.
The selected setting appears in the TIMER
menu.
5
• To change the setting, press
</, to highlight the item you want to change,
then press
M/m to reset it.
• To cancel the setting, press CLEAR.
6
Press MENU to exit the menu.
If any settings remain, turn off the VCR to return to recording standby.
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
2
CDE
LP
VPS / PDC
ON
THU
2 8 . 9
1 0 : 0 0
1 1 : 3 0
. 1 0
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Programme 1
Programme 2