Sony SLV-SE100A2 - Manual (Page 62)

62 Playing/searching at various speeds
To resume normal playback
Press H PLAY.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode*
1 , noise may appear or there may be no colour.
• If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.
• The picture may show noise when playing at high speed in reverse.* 2
* 1 not available on SLV-SE100A1/A2 and SE200V1/V2
* 2 SLV-SE100A1/A2, SE200V1/V2, SE250D/P, SX250D, and SE300D1/D2 only
Play at twice the normal speed* 1 During playback, press ×2.
Play in slow motion During playback, press y SLOW.
Play frame by frame
During pause, press M FF or m REW on the remote
commander. Hold down M FF or m REW to play one
frame each second.
Rewind and start play During stop, press H PLAY on the VCR while holding down
m on the VCR.
Playback options Operation