Sony SLV-SE100A2 - Manual (Page 12)

12 Connecting the VCR
Additional connection
To a satellite or digital tuner
with Line Through
(SLV-SE300D1/D2 and
SE480D only)
Using the Line Through function,
you can watch programmes from
a satellite or digital tuner
connected to this VCR on the TV
even when the VCR is turned off.
When you turn on the satellite or
digital tuner, this VCR
automatically sends the signal
from the satellite or digital tuner
to the TV without turning itself
on.
Note
• You cannot watch programmes on the TV while recording unless you are recording a satellite
or digital programme.
1 Connect the satellite or digital tuner to the DECODER/LINE-3 IN connector as
shown above.
2 Set DECODER/LINE3 to LINE3 in the OPTIONS-2 menu.
3 Set POWER SAVE to OFF in the OPTIONS-2 menu.
4 Turn off the VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Scart cable (not supplied)
DECODER/
t LINE-3 IN
LINE OUT
: Signal flow