Zanussi ZOP37902 - Manual (Page 19)

Problem Possible cause Solution
The display shows an error code that
is not on this list.
There is an electronic fault. 1. Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and acti-
vate it again.
2. If the display shows the error
code again, contact the service
centre.
Steam and condensation collect on
the food and in the oven.
You left the dish in the oven for too
long.
Do not keep the dishes in the oven
for longer than 15-20 minutes after
the cooking ends.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to "Safety information" chapter.
Building In
573
594
589
558
548 20
min. 550
20
580
min. 560
19
www.zanussi.com