Zebra Technologies P420 - Manual (Page 14)

6
The P420 Printer requires approved ribbons (See Appendix C).
The Resin Thermal Transfer and Dye Sublimation ribbons are
specifically designed for your P420 Printer. For optimum perfor-
mance and printer life (Print Head), always use approved ribbons.
1. Remove ribbon from packaging.
2. With printer power ON and READY
status, open cover and press down on the
Print Head Unlock Lever to open the print
head carriage. The print head carriage
will pop open.
DO NOT TOUCH the print head or the
electronic components on the print head
carriage. Discharges of electrostatic charge
from the human body or other surfaces can
damage the print head or other electronic
components used in this device.
Continued on next page ......
2.2
Loading Ribbons
OPERATION