Install driver, Install driver on windows 95/98 – Zebra Technologies P420 User Manual
Page 28
The Printer Wizard will copy the necessary files to the PC for you
and the P420 printer driver installation will be completed.
20
This installation uses floppy drive 'A' or from CD Rom as the
installation drive with the printer used as stand alone.
°
Start your computer and then Windows.
°
Insert your 'Eltron Software' diskette into the drive 'A' or CD drive.
°
Under Windows click the Start button, select Settings, then Printers.
°
Double click on the Add Printer icon and also Next.
°
Ensure Local Printer is selected and click on Next.
°
Click on Have Disk and then type in 'A:\win95' and click OK.
°
P420 CARD PRINTER should be displayed after which click on Next.
°
Choose LPT1 : Standard Printer Port, click on Next, select Yes to set as
Default Printer and click on Finish to install.
A
. To install the P420 Printer Driver in Windows 95/
98, use the following steps:
IMPORTANT NOTE - ENSURE THAT YOUR PC PRINTER PORT IS
SET TO STANDARD MODE AND ALSO ENSURE THAT YOU HAVE
DELETED ANY PREVIOUS VERSIONS OF THIS PRINTER DRIVER.
IF YOU HAVE ANY DOUBTS PLEASE CONTACT YOUR IT
DEPARTMENT.
PRINTING A SAMPLE CARD