Zebra Technologies P420 - Manual (Page 29)

Once the printer driver has been successfully installed, you will
need to configure it for your printer. This driver provides control of
several printer features when printing from Windows applications.
These features are accessed through the P420 Plastic Card Printer
Properties. To access these properties select the P420 Card
Printer icon in Printers. Then click File Menu and select
Properties.
21 PRINTING A SAMPLE CARD
B . To install the P420 Printer Driver in Windows NT4.0:
Set printer as Not Shared for stand alone use.
Use the steps provided for Windows 95/98 installation with the
exception of step 6. where you must type in 'A:\nt40' instead
and click OK.
ENSURE THAT YOU HAVE ADMINISTRATIVE PRIVILEGES TO
PERFORM THIS INSTALLATION OR CONTACT YOUR IT DEPARTMENT.
The P420 Printer screen appears. Change the options as follows:
° On the Printer tab configure the magnetic encoder feature. If your printer is equipped
with a Magnetic Encoder option, select With Magnetic Encoder option.
° On the Card tab select card orientation:
Landscape or Portrait - Select 'Landscape'.
° On the Ribbon tab, select the Ribbon Type. Select YMCKOK for the standard
6-panel ribbon.
° In the same tab, go to Black Panel area and select Text Only. This option
allows the text printing using the Black Resin Panel from the Color Ribbon.
° Close the Eltron P420 Printer Properties screen.
C . Set Printer Driver Options
Now that you have loaded media and set up the printer
driver, the P420 Printer is ready to print.