Zebra Technologies P420 - Manual (Page 25)

CLEAN PRINT HEAD
To clean the Thermal Print
Head and card transport system
CLEAN MAG.HEAD*
To clean the magnetic
Encoder Head
GO TO MAIN MENU
TEST PATERN
To print a printer test card
PRINT PARAMETERS
To print a test card showing
the operating parameter settings of the printers
MAG - PARAMETERS*
To print a test card showing the operating
parameter settings of magnetic encoder.
GO TO MAIN MENU
Ribbon type
To show the type of ribbon installed.
It may not match the ribbon physically installed
until the installed ribbon has been selected through
the driver
Offset X: aa-Y:bb
To show the X print location offset
value in pixels (aa)
To show the Y print location offset
value in pixels (bb)
Mag. Option: cccc
To show the setting of the magnetic
encoder as (cccc), which can be:
- HICO (high coercivity)
- LOCO (low coercivity)
- NONE (no encoder present)
Color Parameters
To show the intensity values of Yellow (Y),
Magenta (M) and Cyan (C) panels and contrast
value of Black Resin (K) Panel.
Printer Model Number
Printer Firmware Version
Number of impressions
Reject Box Status
To show the number of cards remaining in the
reject box
GO TO MAIN MENU
PRINTER
INFO
17 OPERATION
GO TO MAIN MENU
PRINTER
DEFAULTS
To run
printing
To run
cleaning
CLEANING
MENU
SELF TEST
MENU
Next
Next
Next
Next
Next
Next
Next
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Select
Next
Next
Next
Next
READY