3Com Wireless LAN WX1200 - Manual (Page 458)

458 C HAPTER 14: S ECURITY ACL C OMMANDS
rollback security acl Clears changes made to the security ACL edit buffer since it was last
saved. The ACL is rolled back to its state after the last commit security
acl command was entered. All uncommitted ACLs in the edit buffer are
cleared.
Syntax — rollback security acl {acl-name | all}
„
acl-name — Name of an existing security ACL to roll back. ACL names
must start with a letter and are case-insensitive.
„
all — Rolls back all security ACLs in the edit buffer, clearing all
uncommitted ACEs.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
In mapping Application of security ACLs to incoming traffic on the WX
switch:
„
True — Security ACLs are mapped to incoming traffic.
„
False — No security ACLs are mapped to incoming
traffic.
No VLAN or PORT
mapping Application of security ACLs to WX VLANs or ports on the
WX switch:
„
True — No security ACLs are mapped to VLANs or ports.
„
False — Security ACLs are mapped to VLANs or ports.
No VPORT mapping Application of security ACLs to WX virtual ports on the WX
switch:
„
True — No security ACLs are mapped to virtual ports.
„
False — Security ACLs are mapped to virtual ports.
Table 81 Output of display security acl resource-usage (continued)
Field Description