3Com Wireless LAN WX1200 - Manual (Page 513)

set dot1x quiet-period 513
set dot1x
quiet-period Sets the number of seconds a WX remains quiet and does not respond to
a supplicant after a failed authentication.
Syntax — set dot1x quiet-period seconds
„
seconds — Specify a value between 0 and 65,535.
Defaults — The default is 60 seconds.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to set the quiet period to
90 seconds:
WX4400# set dot1x quiet-period 90
success: dot1x quiet period set to 90.
See Also
„
clear dot1x quiet-period on page 502
„
set dot1x wep-rekey-period on page 518
set dot1x reauth Determines whether the WX switch allows the reauthentication of
supplicants (clients).
Syntax — set dot1x reauth {enable | disable}
„
enable — Permits reauthentication.
„
disable — Denies reauthentication.
Defaults — Reauthentication is enabled by default.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to enable reauthentication of
supplicants (clients):
WX4400# set dot1x reauth enable
success: dot1x reauthentication enabled.