3Com NBX 2101 - Manual (Page 92)

92 A PPENDIX A: F EATURE C ODES AND P AGING C ODES
Paging Codes Use the Paging feature to make an announcement over your public
address system, over NBX Business Telephones, or both.
After you dial the paging code, as shown in Table 16 , speak into your
telephone handset, and then hang up.
Do not press the Feature button prior to dialing the Paging code.
Hunt Groups and Calling
Groups Log into a dynamic hunt group
or calling group using the
group number that is assigned
by your administrator. The
assigned number will be
between: On an
NBX 100
system:
850 — 879
On a
SuperStack 3
NBX system:
850 — 879
or
900 — 969
Dial the password assigned by
your administrator.
Transfer Transfer an incoming call to
another user 420
■
Announce the call to the user
first then hang up,
or
■
Simply hang up.
Table 15 Feature Codes - Managing Incoming Telephone Calls (continued)
T - Use the same code to activate and to deactivate this feature.
Table 16 Paging Codes
Feature Description
NBX 100
(default codes)
SuperStack 3 NBX
(default codes)
External Paging Broadcast an
announcement over a
public address system 620 6200
Internal Paging Broadcast an
announcement through
the speaker on users’
NBX Business
Telephones 621 6201
Simultaneous Paging Broadcast an
announcement
externally and internally
at the same time 622 6202