3M SCP717 - Manual (Page 25)

20 © 3M 2008. All Rights Reserved.
User Controls 3M™ Super Close Projection System
Control Panel & Remote Control
There are two ways for you to control the functions:
Remote Control and Control Panel.
Using the Control Panel
Power/Standby Refer to the “Power On/Off the Projector” section
on pages 15-16.
Re-Sync Automatically synchronize the projector to the
input source.
Source Press “Source” to select an input signal.
Menu Turn the menu On or Off.
Four
Directional
Select Keys
Use to navigate through the menus.
Enter Confirm your item selection.
/
Keystone
Adjust image distortion caused by tilting the pro-
jector (±16 degrees).