3M SCP717 - Manual (Page 7)

2 © 3M 2008. All Rights Reserved.
Usage Notice 3M™ Super Close Projection System
Precautions
Follow all warnings, precautions and maintenance as
recommended in this user’s guide to maximize the life of
your unit.
WARNING
• Do not look into the projector’s lens when the lamp is on. The
bright light may hurt your eyes.
• To reduce the risk of injury to the eyes, do not look directly into
the laser light on the remote control and do not point the laser
light into anyone eyes. This remote control is equipped with a
Class II laser that emits radiation.
• To reduce the risk of fire or electric shock, do not expose this
product to rain or moisture.
• Please do not open or disassemble the product as this may
cause electric shock.
• When changing the lamp, please allow unit to cool down, and fol-
low all changing instructions.
• Position the power cord and data cable so that they can not be
tripped over.
• Do not remove any screws other than those specified in the lamp
replacement instructions.
• Disconnect power cord when the projector is not in use, during
lamp replacement and while cleaning.
• Switch power "OFF" and disconnect the plug from electrical outlet
before replacing the lamp. Grasp plug and pull to disconnect.
• Do not attempt to service the projector; other than the lamp car-
tridge there are no user serviceable parts inside the projector.