3M SCP717 - Manual (Page 3)

© 3M 2008. All Rights Reserved. iii
3M™ Super Close Projection System Table of Contents
a. This warranty does not cover 3M Product that is modified or damaged through im-
proper storage, misuse, abuse, accident, vandalism, improper installation, neglect,
improper shipping, damage caused by acts of war, disasters such as fire, flood, and
lightning, improper electrical current, software problems, interaction with non-3M prod-
ucts, or service other than by an 3M Authorized Service Provider, neglect or mishan-
dling by any person. Normal wear and tear is not covered under warranty.
b. 3M Product is designed to operate in the typical indoor environment. This warranty
does not cover 3M Product used outside of the following circumstances:
o 100V-240V AC, 50/60 Hz
o 16° to 29° C (60° to 85° F)
o 10-80% RH (without condensation)
o 0-1828m (0-6000 feet) above sea level
c. The Air Intake and Exhaust Vent must be clear of obstructions, including any potential
blockage or obstructions caused from a ceiling or other mount. Inadequate air ventila-
tion will cause the 3M Product to malfunction or will cause damage to the 3M Product
which will void the warranty.
d. This warranty does not cover any additional costs including, but not limited to, those
associated with removal, cleaning or installation of the 3M Product, adjustments,
(mechanical or electronic) made to the 3M Product or replacing customer replaceable
parts like lamps and air filters.
e. This warranty covers only normal use of the product. 24-hour-per-day or other exces-
sive continual use causes strain and is not considered normal use.
f. This warranty does not cover consumables (e.g., fuses), other than lamps and only as
set forth below.
g. This warranty is not transferable.
h. 3M is not responsible for warranty service should the 3M label or logo or the rating
label or serial number be removed unless otherwise stated in writing for the purposed
of private labeling for partnership requirements.
i. This warranty does not cover postage, insurance, or shipping costs incurred in pre-
senting your 3M Product for warranty service. Said costs are the customer’s respon-
sibility. If a claimed defect cannot be identified or reproduced in service, the customer
may be held responsible for cost incurred. Should your warranty upgrade include a
“change out” service and the claimed defect cannot be identified or reproduced by the
technician, the customer will be responsible for call out costs.
FAILURE TO FOLLOW THE INSTRUCTIONS CONTAINED IN THE APPROPRIATE 3M
PRODUCT MANUAL OR TO USE THE 3M PRODUCT IN ACCORDANCE WITH 3M’S IN-
TENDED USE STATEMENT, WILL VOID ALL WARRANTIES AND LIMITED REMEDIES.