Edimax Technology BR-6675nD - Manual (Page 116)

115
Add Add the mapping to port forwarding table.
Reset Remove all inputted values.
All existing URLs will be displayed in ‘Current URL Blocking Table’:
If you want to delete a specific port forwarding entry, check the ‘select’ box of the port
forwarding entry you want to delete, then click ‘Delete Selected’ button. (You can select
more than one port forwarding entries). If you want to delete all port forwarding entries
listed here, please click ‘Delete All’ button or you can also click ‘Reset’ button to unselect all
port forwarding entries.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 60 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.